Chain Link Fence Cost Calculator

Average cost per linear foot (installed)

Use these ranges as a starting point for a chain link fence cost estimate, then refine with your yard photo in Yard AI. Most residential installs land between $10 and $30+ per linear foot depending on height, gauge, coating, terrain, and local labor.

Typical 2026 bands: 4-ft galvanized about $10–$18/ft installed; 5-ft about $12–$22/ft; 6-ft about $15–$28/ft. Black vinyl-coated usually adds roughly $2–$6/ft versus bare galvanized.

Material-only DIY kits are often $5–$12 per foot; professional labor commonly adds $5–$15 per foot depending on region and soil.

Quick length estimates (materials + labor)

Ballpark totals for a standard 4–6 ft residential install (before specialty gates or steep grades): 40 ft about $400–$1,200; 100 ft about $1,000–$2,800; 150 ft about $1,500–$4,200; 200 ft about $2,000–$5,600.

Add $150–$600 per walk gate and $300–$1,200+ for a driveway gate. Corner/end posts, concrete footings, and rocky soil raise labor quickly.

What drives the price up or down

Height and gauge matter most for fabric cost. Heavier 9-gauge mesh costs more than lighter 11.5-gauge. Vinyl-coated black chain link costs more upfront but often lasts longer in humid or coastal climates.

Site conditions matter next: slopes, tree roots, poor access, and HOA/permit rules can add time. Always check local permit requirements before you dig post holes.

A photo-based estimate helps because perimeter length, gate placement, and grade are easier to spot than guessing from a blank calculator form.

How to get a tighter estimate with Yard AI

Upload a yard photo, mark where the fence should run, and generate a design with cost context for materials and layout options. That beats a generic chain link fence calculator that only asks for linear feet.

Use the ranges above for budgeting, then validate against a local quote for posts, concrete, and labor rates in your ZIP code.